DynaCal, LLC
  • Home
  • Calibration Services ▾
    • Dimensional
    • Electrical
    • Mechanical
    • Thermodynamic
  • Consulting Support
  • More ▾
    • Post a Review
    • Contact Us
    • Blog
  • Request Service
  • (956) 373-3887

As Eric Said: Perhaps the Better Future Is a Pet Store

Oct 31, 2026

DynaCal | Blog 1

Reflections on rebuilding a calibration laboratory, purchasing priorities, and confidence in measurement

By Felipe Narcio | DynaCal, LLC

In memory of my colleague Eric Lundquist (1963–2023)

Returning to familiar waters

After years spent operating laboratories, assessing their competence, and helping others prepare for accreditation, I am returning to laboratory operations myself. Reestablishing my calibration laboratory in the Rio Grande Valley feels like returning to familiar waters. Unfortunately, some of what I recognize is uncomfortably familiar.

I first encountered these challenges in 1992. Today, I still see relationships opening doors that demonstrated technical capability alone struggles to open. “Yo conozco a alguien” — I know someone — can carry considerable weight. Relationships built through reliable service deserve respect. My concern is whether another laboratory receives a fair opportunity to demonstrate what it can do.

Once that door opens, a second challenge appears: explaining the value of performing the work properly when purchasing decisions give greater weight to price than to the technical differences between services. Together, these pressures can make rebuilding a laboratory feel like starting the same conversation all over again.

What Eric saw in 2021

In March 2021, my colleague Eric Lundquist sent me an email about optical comparator calibration, uncertainty, and Z540 requirements. It began with a specific problem: a customer wanted compliance without providing tolerances for the characteristics being evaluated. Eric needed acceptance criteria before he could make a meaningful conformity decision. [1]

The exchange eventually reached a broader concern. Eric described customers who once sent knowledgeable engineers to evaluate laboratories, but who increasingly relied on accreditation as the main qualification. In his experience, purchasing then lined up accredited suppliers and selected the least expensive, with insufficient attention to uncertainty or capability.

“Metrology is becoming a commodity item,” he wrote. I encouraged him to put his concerns into a paper. He preferred to spend his time earning a living and preparing for retirement. By the end of the exchange, he was discussing opportunities in the pet industry.

Eric passed away on June 14, 2023, at age 60. He and his wife, Julie, owned and operated Pet Supplies Plus in Traverse City, Michigan. [5] I continue to miss his candor and the technical discussions we shared. His commitment to sound measurement practice remains part of his legacy, and the questions he raised continue to influence my thinking.

Eric served as President of Operations at A.A. Jansson. His family’s involvement in metrology spanned four generations, beginning with his great-grandfather Sven Lundquist, who worked alongside C.E. Johansson in Sweden and moved to Michigan in 1923 to manage Ford’s Johansson Gage Block Division. Sven’s sons, Arne and Eric, founded A.A. Jansson in 1961. Arne’s son Karl later served as president, followed by the generation of Eric and Alison Lundquist. [7] Trescal announced its acquisition of A.A. Jansson on January 16, 2024. [6]

Eric was describing what he saw in his own work. Returning to laboratory operations has given me renewed appreciation for the question behind his frustration: how does a laboratory sustain careful technical work if the customer cannot distinguish its value?

What the price needs to cover

A calibration quotation needs to support the work promised. That can include maintaining standards, external calibrations, suitable environmental conditions, competent personnel, uncertainty evaluations, technical review, and the time required to investigate unexpected results.

A lower quotation can reflect efficient operations. It can also reflect a different service. Before comparing prices, the buyer needs to understand which characteristics and ranges will be covered, what method will be used, and what evidence the report will provide. Otherwise, a purchasing comparison can overlook differences that matter to the application.

Accreditation is an important qualification. The difficulty arises when it becomes the end of the technical conversation. A customer still needs to establish whether the offered service meets the requirements of the particular measurement task.

Confidence belongs to the measurement process

Eric emphasized a fundamental point: the capability of a reference standard alone does not establish the uncertainty of the complete calibration process. The device under test, the method, repeatability, environmental influences, and other significant contributors must be considered as applicable. NIST describes a measurement model as representing the process and including all quantities that contribute significant uncertainty to its result. [2]

That distinction matters when a customer receives a “pass.” What tolerance was used? What uncertainty applies? What decision rule determined acceptance? A result near a tolerance limit requires a clear understanding of how that rule treats uncertainty and the associated risk.

ISO/IEC 17025 includes requirements for decision rules and customer agreement when statements of conformity are requested, subject to the provisions of the standard. ILAC G8 explains those requirements and different approaches to accounting for uncertainty. [3] My concern is how consistently those provisions become understood, implemented, and assessed in actual work.

When specific Z540 protections are required, the purchasing agreement needs to preserve them explicitly. Replacing that request with a general demand for an accredited calibration leaves an important question unanswered: are the same technical protections still being delivered?

Who verifies the implementation

Gossman’s 2026 NCSLI presentation raises related concerns about measurement decision risk in high-risk industries and proposes a complementary standard. [4] That brings me back to a practical question: who will assess its implementation, and what technical evidence will they examine?

A requirement becomes useful when competent people can demonstrate that it is being met. The assessment needs to examine how the laboratory performs the measurement, evaluates uncertainty, reaches its conformity decision, and reports the result. Where deficiencies are found, someone must verify that corrective action has addressed the cause.

This is also a responsibility for customers. Purchasing needs access to technical judgment, and laboratories need a fair opportunity to explain their capability. Familiarity, an accreditation certificate, and an attractive quotation each provide information. Together, they still need to lead to a service that meets the intended measurement requirements.

A reason to keep building

There is light at the end of the tunnel. A customer can begin by asking better questions. A laboratory can explain what its quotation includes and demonstrate the technical basis for its results. An assessor can follow a measurement through the actual process and examine the evidence supporting the final decision.

For those of us rebuilding laboratories, these conversations offer a practical way forward. They help customers recognize the work they are paying for and give capable laboratories an opportunity to earn trust through demonstrated performance.

I still believe that work is worth pursuing. Eric’s email reminds me why the business conditions surrounding it deserve attention as well. Technical quality needs customers who can recognize its value and a market in which laboratories can afford to provide it.

And if the calibration industry continues to struggle with that proposition, perhaps Eric had another lesson for us. His closing advice was: “Time to start a pet franchise my friend!”

Riley, my dog, has already volunteered to evaluate the treats.

Sources

[1] Eric Lundquist and Felipe Narcio. Personal email correspondence, March 15–16, 2021, “Optical Comparator Certs and Compliance,” pp. 1–4 and 8–9. The title paraphrases Eric’s recommendation.

[2] NIST Technical Note 1297, Appendix A, section A.1. https://www.nist.gov/pml/nist-technical-note-1297/nist-tn-1297-appendix-law-propagation-uncertainty

[3] ILAC G8:09/2019, Guidelines on Decision Rules and Statements of Conformity, sections 2–5. https://www.iasonline.org/wp-content/uploads/2025/09/ILAC_G8_09_2019.pdf

[4] Gossman. “Accreditation in High-Risk Industries: A Compliance Strategy.” 2026 NCSLI presentation, slides 13 and 18–20.

[5] Martinson Funeral Home. “Eric V. Lundquist,” obituary published June 19, 2023, also available on Legacy.com. https://www.legacy.com/us/obituaries/name/eric-lundquist-obituary?id=52270630

[6] Trescal. “Trescal completes 100th acquisition,” January 16, 2024. https://www.trescal.com/news/trescal-completes-100th-acquisition/

[7] A.A. Jansson, Inc. Precision Measuring Service and Equipment catalog, “Our Place in History” and “Modern Leaders,” PDF pp. 2–3. https://uploads-ssl.webflow.com/5da8a551cae894734c7a8411/5e435060a0abf90a2370ed15_AAJpricebook.pdf

Home | Privacy Policy | Contact | Blog

  • 956-373-3887 |calibration@dyna-cal.com
  • SAM Cage #: 17LR4
  • NAICS Code: 811210, 541380, 541618, 541690

©2026 DynaCal - All rights reserved

Created with Marketing 360